Skip to the content.

Start here: from “I have a VIDAA TV” to a first real action

English Español

This page turns the rest of the documentation into a decision. Ten minutes of reading, then one concrete action you can reverse. Nothing here requires root, ADB, a firmware change or a purchase.

Step 1 - Identify the exact set (5 minutes, on the TV)

Open the TV’s normal information menu and write down three things:

Menu names vary between models; do not enter a service menu. A brand badge does not tell you the operating system: some VIDAA-branded sets run Android underneath, and the cleanup route for those is different from the one this project documents. If you are not sure what you have, read Check compatibility by feature, not brand before touching anything.

Step 2 - Choose your routes

Each route is independent. Start with route 1; add the others when you are ready. “Reversible” means you can put the setting back from the same menu.

Route What it does What you need Time
1 - On-device settings Turns off content recognition, ad personalization and unwanted data-sharing consents Just the TV remote ~5 minutes, reversible
2 - DNS filtering Stops ad and telemetry domains from resolving An always-on computer, a Raspberry Pi, or router access ~30 minutes
3 - Observe DNS first Shows what your TV actually talks to, so your rules come from evidence The same setup as route 2 One evening of watching
4 - Local control over MQTT Preparatory notes for local remote control Nothing yet - untested on the sets covered here Read only

Route 4 is preparation, not a feature: no model covered by this project has a verified MQTT session yet, and the page says so at the top.

Step 3 - Do one route and log it

Pick the route you chose and follow its page. While you work, keep a copy of the session log template open and fill it in honestly: what you expected, what you saw, what you put back. The first hardware session protocol explains why the log matters more than the outcome: your menus and firmware are the evidence other owners of your model need.

The filled log converts to TESTING.md rows (run the converter without --json for those) and to a shareable report with two offline commands:

python3 scripts/session_to_testing.py your-log.md --json > your-report.json
python3 scripts/validate_model_report.py your-report.json

The validator rejects common identifier patterns (IP and MAC addresses, emails, local hostnames, exact times, long hex tokens) in the JSON report it inspects. That is a pattern check, not anonymization: it does not cover every kind of personal data, and it never looks at the prose around the JSON block. Review all text and photos yourself before sharing anything.

Step 4 - Check your own rules before relying on them

If you maintain your own blocklist or a supplement file, validate it before subscribing the TV to it:

python3 scripts/validate_blocklist.py your-list.txt

It rejects malformed rules, duplicates and rules shadowed by a parent domain, and with --upstream it checks you are not duplicating the list this project subscribes to. Validation checks syntax, never whether the list blocks what you want - that only comes from observing your own TV (route 3).

What this site will never ask of you

Spanish entry points: start here, README en español and preguntas frecuentes. Settings, the first session and feature compatibility also have Spanish guides; other technical guides and reports remain in English.