The first hardware session
| English | Español |
Protocol for the first real cleanup session on the target TV (Toshiba 50UV1553DB, VIDAA). Until this is done and logged, nothing in this repo is verified on that model. Do it with the remote, TV in front of you, about 15 minutes.
Before
- Read the compatibility guide and confirm the model, region and operating system before borrowing steps from another TV. Keep this session limited to the feature being tested.
- Note the firmware version: Settings → Support → About, or Settings → Support → System Info → Version on older sets (paths from the official VIDAA manuals). Write it in the session log.
- Note exactly which privacy-related options exist and their exact wording. Menu names vary; the log needs the real ones, not the ones in docs/01.
During (route 1 only: the reversible on-device settings)
Skip the optional Remove User Data deletion in docs/01 section 3: it cannot be undone and is not part of this session.
- Follow docs/01 one step at a time.
- After each toggle, write down: what the option was called, what you set it to, and anything unexpected.
- Take a photo of any screen whose wording differs from docs/01. Those photos are the evidence for correcting the docs.
After
- Confirm the TV still behaves normally: home screen loads, one app opens (for example YouTube), one HDMI input works.
- Fill the session log in TESTING.md: date, firmware, every step, expected vs observed, reverted (yes/no).
- Only then do claims about this model stop being “unverified”.
Rollback
The settings changed in this session are normal toggles: switch each one back the same way. If something behaves oddly after a change, revert that one change first and note it in the log.
Not in this session
No DNS filtering, no router changes, no MQTT pairing experiments. Those are separate decisions with their own session and their own log entries.